Lantech IGS-3208MGSFP User Manual

Contents

Lantech IGS-3208MGSFP User Manual Manual pdf 12 page image

7Chapter 3 Hardware Installation3.1Hardware installation1. Unpack the Industrial switch2. Check if the DIN-Rail is screwed on the Industrial switch or not. If the DIN-Rail is notscrewed on the Industrial switch, please refer to DIN-Rail Mounting section for DIN-Rail installation. If users want to wall mount the Industrial switch, please refer to WallMount Plate Mounting section for wall mount plate installation. NOTE: Wall mountkits are optional accessories.3. To hang the Industrial switch on the DIN-Rail track or wall.4. Power on the Industrial switch. Please refer to the Wiring the Power Inputs sectionfor knowing the information about how to wire the power. The power LED on theIndustrial switch will light up. Please refer to the LED Indicators section for indicationof LED lights.5. Prepare the twisted-pair, straight through Category 5 cable for Ethernet connection.6. Insert one side of RJ-45 cable (category 5) into the Industrial switch Ethernet port(RJ-45 port) and another side of RJ-45 cable (category 5) to the network device’sEthernet port (RJ-45 port), ex: Switch PC or Server. The UTP port (RJ-45) LED onthe Industrial switch will light up when the cable is connected with the network device.Please refer to the LED Indicators section for LED light indication.[NOTE] Make sure that the connected network devices support MDI/MDI-X. If it does notsupport, use the crossover category-5 cable.7. When all connections are set and LED lights all show in normal, the installation iscomplete.