Lantech IGS-6300-2P User Manual
                             | |
Contents
| 
11Chapter 3 Hardware InstallationHardware installation1. Unpack the Industrial switch2. Check if the Rack mount brackets are screwed on the Industrial switch or not. If theRack mount brackets are not screwed on the Industrial switch, please refer to RackMounting section for rack installation.3. To install the Industrial switch ina 19 inch Rack.4. Power on the Industrial switch. Please refer to the Wiring the Power Inputs sectionfor knowing the information about how to wire the power. The power LED on theIndustrial switch will light up.5. Prepare the twisted-pair, straight through Category 5 cable for Ethernet connection.6. Insert one side of RJ-45 cable (category 5) into the Industrial switch Ethernet port(RJ-45 port) and another side of RJ-45 cable (category 5) to the network device’sEthernet port (RJ-45 port), ex: Switch PC or Server. The UTP port (RJ-45) LED onthe Industrial switch will light up when the cable is connected with the network device.Please refer to the LED Indicators section for LED light indication.7. When all connections are set and LED lights all show in normal, the installation iscomplete. |
Related manuals for Lantech IGS-6300-2P
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine