Lantech IPES/IES-5416DFT Series User Manual

Contents

Lantech IPES/IES-5416DFT Series User Manual Manual pdf 20 page image

19Chapter 3 Hardware Installation3.1Hardware installation3.1.1Unpack switch and check the accessory with packing list3.1.2 Mount the switch on desired position3.1.3 Connect the M23 connector of power input. The PoE supply voltagefor IPES-5416DFT-8 series is connected via a 5-pin M23 connector andsupplied with by an external power supply unit. Voltage of Power InputNon-PoE model Standard model:The power input voltage can be from9.5V to 60VDC72V model:The power input voltage can be from50.4V to 90VDC110V model:The power input voltage can be from43V to 137.5VDCPoE model Standard model:The voltage of power input should use48VDC to feed power IEEE 802.3afstandardized devices or 54VDC forIEEE 802.3at standardized ones.12V model:The power input voltage can be from9.5V to 56VDC to feed power on both