ConformityE220 Series Quick Start Guide 19Screen Element Description• Manual• Automatic• PPPoEThe default WAN protocol is selected as Automatic.CellularAPNEnter the APN provided by the cellular network operator.Access Point Name (APN) is the name (Web address) of an access point forLTE data connection. Generally, wireless cellular network operator providesthe APN to their end users.PINEnter the PIN of the SIM card.SIM card Personal Identification Number (PIN) is used to lock the card,preventing unauthorized phone calls or access to cellular data.Username Enter the login name.Password Enter the password.Wi-FiEnableBy default, Wi-Fi interface is enabled every time the Lantronix Routerreboots. Click and disable the Wi-Fi interface if you do not want to usethem.SSIDService Set Identifier (SSID) is a sequence of characters, which uniquelynames a wireless local area network (WLAN).The default SSID is Maestro.Password The default password is W1rele$$.6. Conformity6.1. Federal Communications Commission (FCC) Compliance StatementThis device complies with part 15 of the FCC Rules. Operation is subject to the following twoconditions:This device may not cause harmful interference.This device must accept any interference received, including interference that may cause undesiredoperation.This device has been tested and found to comply with the limits for a Class B digital pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, uses and can radiate radiofrequency energy.