11: Maintenance and Diagnostics SettingsEDS-MD® Medical Device Server User Guide 88System SettingsThe EDS-MD device server system settings allow for rebooting the device, restoring factorydefaults, uploading new firmware and updating a system’s short and long name.Note: Anytime you reboot the unit, this operation will take some time to complete.Please wait a minimum of 10-20 seconds after rebooting the unit before attempting tomake any subsequent connections.Table 11-12 System SettingsTo Reboot or Restore Factory DefaultsUsing Web Manager To access the area with options to reboot, restore to factory defaults, upload new firmware,update the system name (long or short names) or to view the current configuration, clickSystem in the menu.Using the CLI To enter the command level: enableUsing XML Include in your file: System Settings DescriptionState Click to enable or disable the reboot schedule.Reboot Device Click the Reboot button to reboot the device.Restore Factory Defaults Click Factory Defaults to restore the device to the original factory settings. Allconfiguration will be lost. The EDS-MD unit automatically reboots upon settingback to the defaults.Upload New Firmware FTP to the EDS-MD device. Upload new firmware to the EDS-MD unit byclicking Choose File to browse to the new firmware file, and click Uploadbutton to upload the chosen file to the system. The device automaticallyreboots upon the installation of new firmware.Short Name Enter a short name for the system name. A maximum of 32 characters areallowed.Long Name Enter a long name for the system name. A maximum of 64 characters areallowed.Submit (button) Click Submit after entering the system name.
