Lantronix EPS1 Installation Manual

Lantronix EPS1 Installation Manual Manual pdf 35 page image

6-16: LAT ConfigurationThe EZWebCon configuration software is the easiest way to configure the EPS. The fol-lowing sections cover print configuration methods for LAT hosts.Note: The EPS needs an IP address before you can use EZWebCon. SeeSetting the IP Address on page 4-1 for instructions.LAT print queues can be created by printing to a port or printing to a service. Printingdirectly to a port requires no EPS configuration.Note: Printing directly to a port is the easiest method for printing to theEPS. If you would like instructions for printing to a service, see thePrint Server Reference Manual located on the CD-ROM.6.1 Printing Directly to a Port1 Create a LAT application port that references the EPS port.Figure 6-1: Creating LAT Application Port2 Create and start a print queue that uses the LAT application port.Figure 6-2: Creating and Starting Print Queue3 Add the commands to the SYS$MANAGER:LAT$STARTUP.COM file so therequired LAT devices will be recreated after each host reboot.Note: LAT terminal device characteristics may have to be changed to cor-rectly print certain files. See your VMS documentation for more in-formation.4 Print to the queue.Figure 6-3: Printing to Queue$ RUN SYS$SYSTEM:LATCPLATCP> CREATE PORT LTAnnn/APPLICATIONLATCP> SET PORT LTAnnn/NODE=EPS_xxxxxx/PORT=Port_nLATCP> EXIT$ INITIALIZE/QUEUE/START/ON=LTAnnn:/PROCESSOR=LATSYM/RETAIN=ERROR queue_name$ PRINT/QUEUE=queue_name filename.txt