3: EventTrakIntelliBox-I/O 2100 User Guide 25Detect fluid levels (float sensor connected to the IntelliBox’s digital input) At low level, the IntelliBox triggers its relay to start a fluid pump. If the fluid lever isabnormally low, the IntelliBox sends an email indicating the problem and the actiontaken. At high level, IntelliBox triggers its relay to stop a fluid pump or open a valve torelease the fluid. If the fluid level is abnormally high, the IntelliBox sends an emailindicating the problem and the action taken.Detect pressure (using a digital pressure sensor connected to the IntelliBox digitalinput) Shuts off the valve or opens an emergency valve when it detects high pressure. Turns off a pump or motor. Notifies the user by email.Monitor a PLC (connected to the IntelliBox’s serial port) Queries the device. Sends reports by email and RSS Feed (monitor using an RSS client or a webbrowser). Scans for specific data. When the IntelliBox detects the data, it can automatically:o Reconfigure the attached deviceo Soft reboot the attached device (through the serial port)o Hard reboot the attached device (using the relay)o Trigger an alarm (using the relay)Other ExamplesSecurity Controls a camera using proximity sensors (e.g., zoom, pan, and rotate).Security and Theft Prevention Monitors an attached device. If the device disconnects, sends an email or triggers an alarm (for example).HVAC Systems Preemptively notifies the user of equipment failure. Initiates emergency shutdown or startup. Automatically reports HVAC status (email with attached data). Performs consolidated monitoring of many HVAC systems (RSS feed to a webbrowser).
