3: OperationsAvailable outlet and group power states may be set to on, off or reboot; the rebootoperation turns the outlet(s) off, delays for a period of 15 seconds and then turns theoutlet(s) on.IndividualThe Individual outlet control page displays all outlets assigned to the current user.The user may apply on, off or reboot actions to individual, multiple or all accessibleoutlets.To apply actions to individual or multiple outlets:1. In the Individual Outlet Control section, select the desired action from the ControlAction drop-down menu for each individual outlet to be changed and pressApply.To apply an action to all outlets:1. In the Global Control section, select the desired action from the Control Actiondrop-down menu and press Apply.GroupThe Group outlet control page displays all groups assigned to the current user aswell as the outlets for each group.To select a group:1. Select the group name from the drop-down menu and press Select. The pagewill refresh to display all outlets associated to the selected group name.To apply an action to a group:Select the desired action from the drop-down menu and press Apply.Table 3-1. Outlet State/Control State Field ValuesOutlet State Control State DescriptionOn On Outlet is onOff Off Outlet is offOff Pend On Outlet is off and about to turn on inresponse to a sequence timerOff Reboot Outlet is off and a Reboot action hasbeen initiatedOn Idle On A restart has occurred – Last ControlState has been maintainedOff Idle Off A restart has occurred – Last ControlState has been maintainedOn Wake On A power-loss has occurred –Wakeup State has been appliedOff Wake Off A power-loss has occurred –Wakeup State has been appliedOn/Wait Off Outlet state in transition – Re-queryof outlet status requiredOff/Wait On Outlet state in transition – Re-querySecureLinx SLP Remote Power Manager 16