GLS-PMKLarson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364 www.larsonelectronics.com 1 of 3Golight Stryker Permanent Mount Assembly - Converts MagneticMount Golights to Permanent MountInstruction Manual1. $VVemble together a Phillips head screwdriver,your permanent mount kit / assembly, and a pair ofwire cutters.2. Remove the screws that hold the magnetic base tothe Golight.3. To fully remove the base you will need to cut thewire as close to the butt connectors as possible.Pull the cable out and remove the base.4. Pull the cable out from the back of the Golight.5. Apply the rubber seal.6. Add the two base brackets and replace the screwssecuring the brackets in place.7. Add the mounting plate and secure with a screw.8. Use a pair of butt splices to reconnect wiring asnecessary.

Larson Electronics GLS-PMK Instruction Manual