Laser Pegs TOP FUEL DRAGSTER 1280 Model Instructions
Please read this manual before you begin!Failure to follow this manual’s instructions mayresult in damage to the Triangle Power Base,AC Adapter and/or Laser Pegs®. Not adhering tothese instructions will void the manufacturer’swarranty. The packaging must be kept becauseit contains important information.This manual is copyright and cannot be reproduced or used online without LaserPegs®Ventures LLC permission. Copyright 2013 © All Rights Reserved US Patent#7,731,558 Additional Global & Multiple Patents Pending. Laser Pegs®VenturesLLC. 8304 Consumer Ct Sarasota FL. 34240. Contact: Support@LaserPegs.comCompatible with other construction kitsEach Laser Peg® is color coded on the circuit board insideeach shape. There is No LED In The 90 Degree Peg.Laser Pegs® link thatallows you to connect toother construction kits.www.LaserPegs.comColorCodeWARNING:CHOKING HAZARD-Small parts.Not for children under 3 yrs.Do not submerge in water.All additional model instructions canbe downloaded at www.LaserPegs.comMODEL INSTRUCTIONSConstruction CompatibleLaser Pegs® StackableEN71, RoHS COMPLIANTThis product complies toall safety requirementsof ASTM F 9631280WORLD OF SPEEDFor Boys And GirlsAges 5 And UpLIGHTEDCONSTRUCTION SET INCLUDES:Requires 3-AA BatteriesBatteries NOTIncludedLaser Pegs® Parts ListSQUAREPEG STACKABLE12 Models+ANY CREATION YOU CAN BUILDThere is No LED In The 90 Degree Pegx1SQUAREM-M PEGx1WHEEL PEGTriangle PowerBaseLaser Pegs®Peg Cordx2x2x4 90° PEGSTRAIGHTT PEGx3Y PEGx1Construction Parts Listx16x12x3x2x3x1x4x4x2x1x2x2 x4 x3x4x3x4x4x4x12x2x2 x2x2x2x2x2• 14 Laser Pegs®• 104 Construction parts• Triangle Power Base• Laser Pegs® Peg Cord• Instruction ManualTo construct with Laser Pegs®, slide two pieces together to form aconnection. Slide each piece on and off smoothly. The 90° Pegs areessential to construction but they DO NOT LIGHT UP.This manual is copyright and cannot be reproduced or used online without LaserPegs®Ventures LLC permission. Copyright 2013 © All Rights Reserved US Patent#7,731,558 Additional Global & Multiple Patents Pending. Laser Pegs®VenturesLLC. 8304 Consumer Ct Sarasota FL. 34240. Contact: Support@LaserPegs.comwww.LaserPegs.comConnecting PegsRedPower ButtonOFF/ON/FLASHPeg HolesAC AdapterConnectionUsing anAC AdapterRemove all batteriesfrom Laser Pegs® powerbase before using the5-volt AC adapter.When using an ACAdapter, NEVERplace the adapterplug into the Tri-angle Power Basetop peg holes.WARNING! Each Laser Peg® draws current from the batteries. Therefore, the morepegs you use, the quicker you will deplete your battery power! As the powerweakens, the current will slowly fail and some Laser Pegs® will illuminate (typicallythe reds and yellows) and some won’t. When the Laser Pegs® dim the Laser Pegs®are not broken, they just need stronger batteries or an AC Adapter.You have 3 simple options...1. Use a 5-volt AC Adapter –available from www.LaserPegs.com2. Change the batteries.3. Use high quality batteries. They will last a little longer, but they will still depleterapidly the more laser pegs you connect!*To avoid short-circuits, keep metal objects andother unauthorized materials from obstructingthe peg holes.The AC adapter and the Triangle Power Base are to be regularly examined fordamage to the cord, plug, enclosure and other parts, and in the event of suchdamage, they must not be used until the damage has been repaired.Never connect more than 200Laser Pegs® when using a 5-volt(2000mA) AC Adapter.Replacing Batteries1. Remove the three (3) screws.2. Place three (3) AA batteries in the correctposition - as displayed inside the TrianglePower Base.3. Reassemble the Triangle Power Base.4. Replace the three (3) screws.5. Push RED Power Button to turn on!6. Do not mix old and new batteries.7. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium,NiMH) batteries!8. Exhausted batteries are to be removedfrom the Triangle Power Base.9. Never connect more than 200 Laser Pegs®10. Non-rechargeable batteries are not to berecharged.11. Rechargeable batteries are only to berecharged under adult supervision.12. Rechargeable batteries are to be removedfrom the toy before being recharged.13. Batteries are to be inserted with thecorrect polarity.14. The supply terminals are not to be short-circuited.Push RedPower Buttonto turn on/offPush Red Power Button tocycle through 3 differentlight settings.Copyright 2013© All Rights Reserved Global & Multiple Patents Pending.US Patent #7,731,558www.LaserPegs.comAdd 3-AA Batteries3-AA Batteries1STEP2STEP3STEP4STEPModelDifficultyLevelTOP FUEL DRAGSTERTOP FUEL DRAGSTER - Believe it or not, these dragsters — with horsepower twice as power-ful as a diesel train — slow themselves down with a parachute designed by a cartoonist.A |
Related manuals for Laser Pegs TOP FUEL DRAGSTER 1280
Laser Pegs Dragster Truck PB 1430B Model Instructions
Laser Pegs 1270 Model Instructions
Laser Pegs 1070 Model Instructions
Laser Pegs 1070 Model Instructions
Laser Pegs 1070 Model Instructions
Laser Pegs 1070 Model Instructions
Laser Pegs 1070 Model Instructions
Laser Pegs 1070 Model Instructions
Laser Pegs 1070 Model Instructions
Laser Pegs SEA MONSTER 1070 Model Instructions
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine