LaserLiner DigiLevel Pro 120 Manual

Also see for DigiLevel Pro 120: Quick start guide Manual

DigiLevel Pro 30/60/120Memory functions:• With the memory function (6), the current measurement result can besaved in the internal memory, whereby the current memory position(M1 - M9) is displayed during the saving process (9).• If more than 9 results are saved, the old ones are overwritten.• The memory retrieval button (4) can be pressed to show the mostrecently saved result in the display (8). By repeatingly pressing thememory retrieval button (4), all the stored results (9) can be retrieved.• Return to normal (6)GB10 GB 11Laser radiation!Do not stare into the beam!Class 2 laser< 1 mW · 650 nmEN 60825-1:2007-10Warranty:The warranty is valid for 2 years from the date of purchase. The warranty doesnot cover damage caused by improper use or storage, normal wear and tear, ordefects which only insignificantly impair the value of the product or itsfunctioning. Any tampering by unauthorised persons will render this warrantyvoid. In the event that you need to claim warranty, please take the completedevice together with all information and the invoice to one of our dealers or sendit in to UMAREX-Laserliner.Electronic measuringprecision:+/- 0,1° at 0° and 90°,+/- 0,2° at 2° – 89°Display accuracy 0°- 1° 2 decimal placesDisplay accuracy 1°-90° 1 decimal placeVial accuracy + 0,5 mm/mLaser class 2 < 1 mW (EN 60825-1:2007-10)Laser wavelength 650 nmWorking temperature 0°C...40°C (32°F...104°F)Storage temperature -20°C ... 65°CPower supply 2 x 1.5V (Typ AAA/LR03)Dimensions 30 60 x 33 x 300 mmDimensions 60 60 x 33 x 610 mmDimensions 120 60 x 33 x 1220 mmWeight 30/ 60/ 120 0,4 / 0,8 / 1,2 kgArticle-No. 30/ 60/ 120 081.212A/ 081.210A/ 081.216ASubject to technical change without notice 10.2008Technical data:Spirit level function:• The alignment to the measuring surface (14) is shown by the vertical andhorizontal vials (11, 12).• Use the vials for optimum vertical and horizontal alignment, and theelectronic slope angle display for any desired angle of slope.• With the aid of the magnets (13), the DigiLevel Pro can be affixed to anymagnetic surface.Calibration:• (A) Place the unit with its measuring edge (14) down on a straight sur-face and mark the positions of the unit‘s ends on the underlying surface(see Fig. below). Switch the unit on (2) and press the REF button (1) untilCAL 1 starts blinking. Shortly thereafter an acoustic signal will sound andCAL 2 will appear in the display. Now turn the unit around horizontally(end-for-end) by 180° (B) such that its ends are positioned opposite wherethey previously were but again exactly at the underlying surface marks(reverse measurement). Again press the REF button (1) until CAL 2 blinks.The subsequent acoustic signal concludes the process.• Follow-up test: The unit is properly calibrated when it displays the samemeasurement value, i.e. the underlying surface‘s deviation from absolutelevel, in both positions (0° and 180°).Switching off:• To switch off the DigiLevel, press the on/off switch (2) for at least3 secs. When not in use, the DigiLevel switches off automatically.(A)(B)0°180°General safety instructionsAttention: Do not look directly into the laser beam! The laser may notget into the hands of children! Do not point this device unnecessarilytoward persons.Note: Regularly check the unit‘s calibration before use, after transportingand extended periods of storage.