LaserLiner PowerCross-Laser 8 S Quick Start Manual

Also see for PowerCross-Laser 8 S: Operating instructions Instructions

Contents

general safety instructions

LaserLiner PowerCross-Laser 8 S Quick Start Manual Manual pdf 12 page image

12High-precision cross-line laser with 8 ultra bright laser linesand plumb laser– Homogeneous 360° laser line: The 4 horizontal laser diodes projecta homogeneous laser line. This enables the device to be used likea rotary laser.– IR remote control allows the manual slope function for aligning inclines tobe controlled. The relevant axes are visually displayed via LEDs.– A simple, precise plumb function is afforded by the additional plumb laserat the bottom and the laser cross at the top.– Out-Off-Level: is indicated by optical signals when the unit is outside itsself-levelling range.– Automatic levelling range 3°, accuracy 1 mm / 10 mGBRead the operating instructions and the enclosed brochure „Guaranteeand additional notices“ completely. Follow the instructions theycontain. This document must be kept in a safe place and if the laserdevice is passed on, this document must be passed on with it.!General safety instructions– Attention: Do not look into the direct or reflected beam.– Do not point the laser beam towards persons.– If a person‘s eyes are exposed to class 2 laser radiation, they should shuttheir eyes and immediately move away from the beam.– Under no circumstances should optical instruments (magnifying glass,microscope, binoculars) be used to look at the laser beam or reflections.– Do not use the laser at eye level (1.40 ... 1.90 m)– Reflective, specular or shiny surfaces must be covered whilst laser devicesare in operation.– The device must only be used in accordance with its intended purposeand within the scope of the specifications.Laser radiation!Do not stare into the beam!Class 2 laser< 1 mW · 635/650 nmEN 60825-1:2014