LaserLiner SensoLite 120 Quick Start Manual

Also see for SensoLite 120: Operating instructions

Contents

inserting the battery

LaserLiner SensoLite 120 Quick Start Manual Manual pdf 7 page image

SensoLite 12007EN34 mmLaserThe laser receiver has two tolerance settings:– yellow LED = Free-hand range: Display with larger tolerancefor rough alignment by hand.– green LED = Precision range: Display with smaller tolerancefor precision alignment (e.g. levelling staff).!slow peepingContinuous tone =mark the referencerapid peepingWorking with the laser receiverSet the rotary laser to maximum speed and switch the laser receiver on.It is able to detect the laser beam at a great distance now. Move theSensoLite up and down through the laser beam until the middle indicatorappears. Mark the measured height at the perimeter marking groove.Inserting the batteryIn order to preserve thebattery life, the receiverswitches off automaticallyif it is not used for around5 minutes.