08General safety instructions– The device must only be used in accordance with itsintendedpurpose and within the scope of the specifications.– The measuring tools and accessories are not toys.Keep out of reach of children.– Modifications or changes to the device are not permitted, thiswill otherwise invalidate the approval and safety specifications.– Do not expose the device to mechanical stress, extremetemperatures, moisture or significant vibration.– The device must no longer be used if one or more of itsfunctions fail or the battery charge is weak.– Attention: Do not look into the direct or reflected beam.– Do not point the laser beam towards persons.– If a person‘s eyes are exposed to class 2 laser radiation, they shouldshut their eyes and immediately move away from the beam.– Under no circumstances should optical instruments(magnifying glass, microscope, binoculars) be used to lookat the laser beam or reflections.– Do not use the laser at eye level (1.40 ... 1.90 m)– Reflective, specular or shiny surfaces must be covered whilstlaser devices are in operation.– In public areas shield off the laser beam with barriers andpartitions wherever possible and identify the laser area withwarning signs.Safety instructionsUsing class 2 lasersENCompletely read through the operating instructions, the"Warranty and Additional Information" booklet as wellas the latest information under the internet link at theend of these instructions. Follow the instructions theycontain.This document must be kept in a safe place andif the laser device is passed on, this document must bepassed on with it.!Laser radiation!Do not stare into the beam!Class 2 laser< 1 mW · 515 nmEN 60825-1:2014The automatic cross-line laser for aligning tiles,wall studding, windows, doors etc.