07SuperCross-Laser2PCompletely read through the operating instructions, the "Warranty and Additional Information" booklet aswell as the latest information under the internet link at the end of these instructions. Follow the instructionsthey contain.This document must be kept in a safe place and if the laser device is passed on, this documentmust be passed on with it.!The automatic cross-line laser with plumb function and integrated hand-held receiver modefor aligning tiles, wall studding, windows, doors etc.General safety instructions– The device must only be used in accordance with its intendedpurpose and within the scope of the specifications.– The measuring tools and accessories are not toys. Keep out of reach of children.– Modifications or changes to the device are not permitted, this will otherwise invalidate the approval and safetyspecifications.– Do not expose the device to mechanical stress, extreme temperatures, moisture or significant vibration.Safety instructionsUsing class 2 lasers– Attention: Do not look into the direct or reflected beam.– Do not point the laser beam towards persons.– If a person‘s eyes are exposed to class 2 laser radiation, they should shut their eyes andimmediately move away from the beam.– Under no circumstances should optical instruments (magnifying glass, microscope, binoculars)be used to look at the laser beam or reflections.– Do not use the laser at eye level (1.40 ... 1.90 m)– Reflective, specular or shiny surfaces must be covered whilst laser devices are in operation.– In public areas shield off the laser beam with barriers and partitions wherever possible andidentify the laser area with warning signs.Laser radiation!Do not stare into the beam!Class 2 laser< 1 mW · 635 nmEN 60825-1:2014EN