LaserLiner SuperCross-Laser Compact Manual

Contents

LaserLiner SuperCross-Laser Compact Manual Manual pdf 8 page image

084 EU directives and disposalThis device complies with all necessary standards for thefree movement of goods within the EU.This product is an electric device and must be collectedseparately for disposal according to the EuropeanDirective on waste electrical and electronic equipment.3 Slope modeLock the transport restraint and switch on the laser (button 1). Nowslopes can be laid out. IMPORTANT: This mode cannot be used toperform horizontal or vertical levelling because the laser lines are nolonger automatically aligned.± 4°± 5 mm / 10 m20 m635 nm2 / < 1 mW1 x 1.5 V alkaline cell(type AA, LR6) / 5 hr.0°C ... +50°C-10°C ... + 70°C35 x 153 x 36 mm0,13 kgSelf-levelling rangePrecisionOperating range (dependingon room illumination)Laser wavelengthLaser class / line laser output powerPower supply / operating timeOperating temperatureStorage temperatureDimensions (W x H x D)Weight (incl. battery)Subject to technical alterations 02.2010. Further safety andsupplementary notices at: www.laserliner.com/info2 Horizontal and vertical levellingOpen the transport restraint and switch on the laser (button 1). Thelaser cross will appear. Now horizontal and/or vertical levelling workcan be done.The Out-Of-Level function must be activated in orderto do horizontal and vertical levelling. It is activated byreleasing the transport restraint. The Out-Of-Level functionsignals when the device is set up outside of its 4° automaticlevelling range. If this is the case, the ON/OFF button willilluminate and the lasers will shut off. Place the device ona surface that is more level.!Regularly check the calibration before use, aftertransport and after extended periods of storage.!GBTechnical data