Laserworld RS-400G User Manual

Contents

Laserworld RS-400G User Manual Manual pdf 4 page image

User manual: RS-400GRev: 09/2009Page 4 of 8Control panel• MODE: select mode, or go up in menu• ENTER: confirm changes, or go down in menu• UP/ DOWN: change DMX addressOperating modes:Automatic mode: built-in patterns are displayedMusic active: laser is controlled from built-in microphone“DMXAddr“: DMX512 mode-. Here you can change the DMX address:“Open“: change address“Up“ & “down“: increase/decrease address“Save“: save new address“LCD display memory function“: save settings automatically.ILDA modeWhen an IDLA compatible interface is connected to the laser, the laser is automaticallyswitched to ILDA mode. Output is then controlled from a PC running software.The laser uses pins 4 and 17 of the IDLA signal to detect the presence of an ILDA interface.Further information can be found in the software manual.1 Operation LED2 Working LED: controlboard working3 DMX LED: DMX connected4 ILDA LED ILDA connected5 DMX In/OuPlease note: the scanners are set to a scanspeed of ca. 22000 PPS at ca. 30°scanangle. If you increase the scanspeed, first reduce the scanangle (image size). Otherwiseyou may damage the scanners! When using with different scanspeed/scananglereadjustment of the scanner drivers may be necessary, if in doubt, contact your dealer.DMX modeChannel DMX512 value Function1 blue 0~63 Auto-Music Mode (Ch 1&2 valid)64~127 Auto-mode (Ch 1&2 valid)128~191 Music-edit mode (All channels valid)192~255 Manual mode (All channels valid)0~63 No Beam64~127 Single colour laser: StrobeMulticolour: colours128~192 Single colour: Fluxion blankingMulticolor: Colour change2 Colour193~255 On0~42 Pattern group 143~85 Pattern group 286~128 Pattern group 3129~171 Pattern group 4172~214 Pattern group 53 Pattern group215~255 Group 6 cartoons4 Pattern 0~255 32 patterns5 Speed 0~255 slow to fast0~63 No function64~127 Rotate horizontally128~191 Rotate vertically6Rotation192~255 Rotate h. & v.0~63 No function64~127 Rotating7 Dot rotation192~255 Rotating & Dotting0~63 No function64~127 Move horizontally128~191 Move vertically8 Move192~255 Move h. & v.