Laski LS 160 Operating Instructions Manual
                                                       | |
Contents
| 
Chipper LS 160T25UseStorageStore the chipper always in a dry shelter to protect it against weather effects.- During storage keep the switch key separately.- Keep the stored machine beyond unauthorised persons reach.- Before storage clean all parts of the machine. For cleaning use pressure water.Should the water be in the chipping device space, wipe it off and let it dry.- Clean especially oily spots.- Exchange all damaged or worn parts. Use always original spare parts. Forspare parts contact your dealer or authorised services.- Do not apply any grease or similar agents on elastic hydraulic hoses.- Always put the machine aside on a flat and solid floor or on a wooden palletfor further handling.- Do not put any objects or tools on the machine.Before Putting into Operation- Before the first putting into operation check up the machine for contingentdamages and completeness after its transport and storage.- Check tightening of bolted joints, especially guards, grids and completeness ofother parts.- Check movability of turnable parts (discharge duct etc.).- Check work safety labels for completeness and legibility. Replace anydamaged and illegible label, if necessary.- Grease bearings and sliding parts.- Check up the hydraulic oil level. While being cold, the oil level should bebetween the MAX and MIN marks on the oil tank gauge. |
Related manuals for Laski LS 160
manualsdatabase
Your AI-powered manual search engine