Lassco Spinnit EBM-2.1 User Manual
Also see for Spinnit EBM-2.1: User manual
                 | |
Operating InstructionsLeveling The Drill BitsPage 09To level the drill bits to the Table, first loosen theLeveling Knob on the right hand side of the machineas shown. Pull down on the Handle to raise the Tableuntil the hollow drill bit is just touching the Drill Strip(EBM2-1034). Hold the Handle in place and tightendown the Leveling Knob until it hits the HandleBracket. This will stop the Handle from being pulleddown too far. It is important to always reset the Levelwith each use. This will make sure you don’t drill intothe Drill Strip, dulling the hollow drill bit.Step #6:When you are ready to drill, set the product to bedrilled on the table and make sure it is secure usingthe Paper Side Stops. Turn the machine on andholding the product firmly in place with one hand, pulldown on the Handle raising the Table up to meet thedrill bit. Using one consistent smooth stroke, putpressure on the Handle so that the Table rises fullyallowing the drill bit to drill through the product. It isimportant you maintain a consistent speed throughthe entire stack. It is also important you do not go tooslow or too fast. If you drill too slow you can burn thepaper leaving undesired marks. If you drill too fast,the drill bits will act more like a punch and they willbreak or plug.Step #7:Note: We recommend using a piece of card stock on the Tablewhen leveling the drill bits to avoid drilling into the drill strip.This will lengthen the life of your drill bits and keep themsharper.DrillingTo move the Table to the next desired hole on thepattern bar, press in on either of the Release Handles(EZ-1010) located on both ends of the table. Press-ing in the Release Handle releases the Table Pinallowing the table to traverse. Release the Handleand slide the Table until it locks into place in the nextdesired position. Repeat Steps #7 and #8 as desireduntil complete.Step #8:Traversing the EZ-Glide TableRelease HandleRelease HandleTable |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine