Lathem PC600 Series User Manual
Also see for PC600 Series: User guideQuick start guide
                                                                    | |
Contents
| 
• 2638 - PayClock Database ServerPC600 Series WAN Installation• At the remote site install mount and connect the terminal tothe network.• With the terminal powered up and connected to the networkpress the Admin button and enter the administrator PIN(99999).• The Administrator Main Menu will display. Press the NetworkSetup button.• The Network Setup screen will display. If using a “static” IPaddress at the terminal select DHCP = Off. Set theterminal’s IP, Subnet Mask and Gateway address. If you areusing DHCP, select DHCP = On. The IP, Subnet Mask andGateway Address will automatically be set when the DHCPsetting is On.• Press the Define Host button. The Define Host screen willdisplay.• Press the Host IP button and enter the IP Address for thecomputer where the PayClock database server resides andpress OK.Note: Use the Server Summary or Connection Info print out forthe PayClock database servers IP address.• Under Live Sync press the Enable button. The Sync Nowbutton will display.• Press the Sync Now button. The screen will turn orangewith “Downloading Latest Data From Host. Please Wait…”.• When finished verify the connection.• Press the Admin button and enter the administrator PIN(99999).• The Administrator Main Menu will display press theDevice Information button.• Verify that the correct Company Name shows.• Press the back button until you have returned to thedefault screen.46 • Appendix A - PC600 Series WAN Installation |
Related manuals for Lathem PC600 Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine