LawnMaster GT1018S Operator's Manual

Also see for GT1018S: User manual

Contents

LawnMaster GT1018S Operator's Manual Manual pdf 11 page image

OPERATIONSwitching ON and OFF ( Fig. 5 )1. Form a loop in the end of the extension cable, conduct it through the opening in the upperhandle (2) and hang it on to the strain relief (3).2. Connect the trimmer to the mains socket.3. Ensure a secure stance and hold on to the trimmer with two hand. Do not deposit the cuttinghead on the ground.4. To switch on depress the ON/ OFF switch (1). Release the switch to switch off.WARNING Danger of injury!11Never use the trimmer without its safety guard. Always check the operability of the trimmer before itis used. Check that the mains voltage is the same as indicated on the rating plate. Always weargoggles when working with the trimmer.NOTE: Once the lower and upper sections of the trimmer has been assembled, they can notbe seperated.After the trimmer has been switched off the cutting head will continue to rotate for a fewseconds. Keep hands and feet well away.The ON / OFF switch must not be locked in place. The trimmer must not be used if theswitch is damaged. There is the immediate danger of injury if the motor does not switchoff after the ON /OFF switch has been released.NOTE: Always remove grass residue from cutter so that the cutting effect is not impaired.Fig. 5WARNINGWARNING①②③