Tel: +44 (0) 1981 241668 www.leadingedgepower.com Page 24 of 48 Rev Q• Damage caused by incorrect connection to external electrical equipment, or failure toobserve current regulations concerning connection to external electrical networks,equipment or any other devices.If you should experience a problem with your turbine, your first ‘port-of-call’ should be the reselleror installer from whom you purchased the product. They should be able to resolve the problemquickly and efficiently. If you are unable to contact the original reseller, then please contact usdirectly.Please quote the serial number of your turbine when dealing with warranty issues. The serialnumber can be found on the nameplate positioned on the underside of the chassis.Disclaimer• All specifications are subject to change without prior notice.• The information given in this User Manual is believed to be accurate and reliable.Leading Edge Turbines assumes no responsibility for omissions or inaccuracies.• The user of this information and product assumes full responsibility and risk.• The LE-600 turbine is a source of electrical power. It must be installed in accordance withlocal building and electrical regulations. Consult your local planning (zoning) office fordetails.• The LE-600 turbine has moving parts that may cause injury due to poor installation andunsafe operation. Leading Edge Turbines assumes no responsibility for problems caused byunsafe or unsatisfactory installation or operation.Designed & Manufactured in the UK by:Leading Edge Turbines LtdSkyrrid Farm,Pontrilas,Hereford.HR2 0BWTel: +44 (0) 1981 241668www.leadingedgepower.comCompliant withEN BS 61400-2: Safety of Small Wind Turbines