LumaPro 2LBL9 Operating Instructions And Parts Manual
                        | |
Contents | 
8 598-1326-01trOuBLESHOOtING GuIDEPOSSIBLE CauSE1. Circuit breaker or fuse is turned off.2. Switch on device is turned off.3. Interrupted by another device.4. Does not respond immediately afterinstallation.5. Signals from transmitter are beingblocked, or transmitter is out of range.6. Weak battery in the transmitter.7. Dip switches on transmitter and receiverunits do not match.8. Device is defective.1. Same as 5, 6, and 7 above.1. Short term power line failure.2. Another transmitter on the samefrequency.SYMPtOMDevice does not come on.Device does not turn off.Device comes on randomly.SOLutION1. Verify circuit breaker or fuse is turnedon.2. Verify switched device is turned on.3. Change codes on transmitter andreceiver units.4. Wait for 90 second initialization period(remote motion sensor).5. Check for metal objects that couldblock the signal, or reposition thetransmitter.6. Check battery charge and replace ifnecessary.7. Verify code settings on transmitter andreceiver units are set the same.8. Test using different device.1. Same as 5, 6, and 7 above.1. Next transmission from transmitterwill reset receiver to correct state.2. Change codes on transmitter andreceiver units.rEGuLatOrY INFOrMatIONThis device complies with Part 15 of the FCC Rules and RSS-210 of Industry Canada. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interferencethat may cause undesired operation.The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were met.The user is cautioned that changes or modifications not expressly approved by the party responsible for regulatory compliance couldvoid the user’s authority to operate the equipment.1 YEar LIMItED WarraNtY:Should this product fail to perform satisfactorily due to a defect or poor workmanship within one year of date of purchase, return itto the place of purchase and it will be replaced, free of charge. Incidental or consequential damages are excluded from this war-ranty. Light bulbs are not covered.Manufactured for Grainger International, Inc.Lake Forest, IL 60045 |
Related manuals for LumaPro 2LBL9
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine