Lumel N30U User Manual
Also see for N30U: User Manual & Quick Start
                                                    | |
8. TECHNICAL DATAMeasuring ranges Table 13ErCAoLack of calibration of analog outputs. Press any buttonto transit to the normal work. Analog outputs will not beserviced. Contact the service workshop.ErCALError of calibration. The work is stopped – The meter isnot in the state to carry out measurements in a correctway. Incorrect checksum of calibration coefficients orlack of calibration.Kind of input Indication range ClassPt100- 205...855°C (-200...850°C)0.1Pt500Pt1000400 W 0...410 W (0...400 W)4000 W 0...4010 W (0...4000 W)Thermocouple of J type -220...1210°C (-200...1200°C)Thermocouple of K type -280...1382°C (-270...1370°C)Thermocouple of N type -250...1310°C (-240...1300°C)Thermocouple of E type -280...1010°C (-270...1000°C)Thermocouple of R type -55...1775°C (-50...1770°C)Thermocouple of S type -55...1775°C (- 50...1770°C)Voltage input 0...10 V -13...13 V (-10...10 V)Current imput -24...24 mA (- 20...20 mA)Voltage input 60 mV -10...63 mV (0...60 mV)Current time 00.00...23.59 0.5 sec/24 hAdditional error of thermocouple cold junction temperature compensation: 0.1%of measuring rangeAdditional error of wire resistance compensation: 0.1% of the 400 W range |
Related manuals for Lumel N30U
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine