MABIS 04-237-001 Instruction Manual

Also see for 04-237-001: Quick start guide

Contents

MABIS 04-237-001 Instruction Manual Manual pdf 7 page image

To change the batteries:1. Open the battery cover, Fig. 2.2. Making sure the battery polarity is correct,install two AAA alkaline batteries, Fig. 3.3. Close the battery cover, Fig. 4.NOTE: It is recommended to remove the batteries if the unit will not beused for an extended period of time.10Replace the batteries when the Low Batterysymbol appears on the display, Fig. 1, or when thedisplay remains blank when the POWERButton is pressed.Fig. 1Fig. 2Fig. 3Fig. 4Battery Installation/Replacement The two buttons positioned on top of the monitor are for settingthe date and time, Fig. A.Time Set button – Sets the entry and/ormoves to the nextmode.Time Adjust button – Increases to thedesired value.NOTE:• The appropriate mode must be flashing tomake a change. Use the Time Set buttonto move within modes (Month/Date/Hour/Minute);otherwise, the mode will automaticallychange to the next mode after approximately10 flashes.To enter into time/date mode:1. Press and hold the Time Set button forapproximately 3-5 seconds until the date/timeappears. Release the button.Fig. AFig. 1Setting the Date/Time11