MAG WASP User Manual
Also see for Sub H12: User manual
                            | |
Contents
| 
5info@mag-audio.comTel./Fax: +38 044 277-47-89 www.mag-audio.comWASP Line Array User Manual rev 1.001. Safety instructions1. Read these instructions carefully.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this equipment near water.6. Clean only with dry cloth.7. Do not block any ventilation openings. Install inaccordance with the manufacturer’s instructions.8. Do not use near heat sources such as stoves, heatregisters, radiatiors or other equipment (includingamplifiers) that produces heat.9. Do not use the unit near open fire sources.10. Connect the unit only to the electric networkwith grounding. Use only electic plugs that providegrounding.11. Protect the power cord from being walked on,pinched, or otherwise damaged.12. Use only accessories specified by the manufacturer.13. Unplug this unit during lightning storms or whenunused for long periods of time.14. Refer all servicing to qualified service personnel.Servicing is required when the system has beendamaged in any way, such as power supply cord or plugis damaged, liquid has been spilled or objects havefallen into the unit, the unit has been exposed to rainor moisture, does not operate normally, or has beendropped.15. WARNING - TO REDUCE THE RISK OF FIRE ORELECTRIC SHOCK, DO NOT EXPOSE THIS SYSTEMUNIT TO RAIN OR MOISTURE.THIS UNIT CONTAINS POTENTIALLY LETHALVOLTAGES. TO PREVENT ELECTRIC SHOCK ORHAZARD, DO NOT REMOVE THE AMPLIFIER MODULE.NO USER SERVICEABLE PARTS INSIDE. REFERSERVICING TO QUALIFIED SERVICE PERSONNEL. 1INSTALLING OF THIS UNIT MUST BE PERFORMEDONLY BY QUALIFIED TRAINED PERSONNELFOLLOWING APPLICABLE SAFETY RULES. DO NOTALLOW INSTALLING OF THIS UNIT IF INSTALLATIONHARDWARE IS BROKEN, BENT, PARTS ARE MISSINGOR IS OTHERWISE DAMAGED.1 - for powered speakers onlyThe triangle with the lightning bolt is used toalert the user to the risk of electric shock.The triangle with the exclamation point is usedto alert the user to important operating ormaintenance instructions.The CE-mark indicates the compliance with thelow voltage and electromagnetic compatibility.Symbol for earth/ground connection.Symbol indicating that the equipment is forindoor use only.Symbol for conformity with Directive 2002/96/EC and Directive 2003/108/EC of the EuropeanParliament on waste electrical and electronicequipment (WEEE).WARNING: TO REDUCE THE RISK OF ELECTRICSHOCK, DO NOT ATTEMPT TO OPEN ANY PARTOF THE UNIT. NO USER-SERVICEABLE PARTSINSIDE. REFER SERVICING TO QUALIFIEDSERVICE PERSONNEL.TO COMPLETELY DISCONNECT THISAPPARATUS FROM THE AC MAINS,DISCONNECT THE POWER SUPPLY CORDPLUG FROM THE AC RECEPTACLE.THE MAINS PLUG OF THE POWER SUPPLYCORD MUST REMAIN READILY ACCESSIBLE.DO NOT EXPOSE THIS EQUIPMENT TO RAINOR MOISTURE, DRIPPING OR SPLASHINGLIQUIDS. OBJECTS FILLED WITH LIQUIDES,SUCH AS VASES, SHOULD NOT BE PLACED ONTHIS APPARATUS.CONNECTIONS TO THE MAINS SHALL BEDONE ONLY BY AN ELECTROTECHNICALLYSKILLED PERSON ACCORDING TO THENATIONAL REQUIREMENTS OF THECOUNTRIES WHERE THE UNIT IS SOLD.EXPLANATIONS OF GRAPHICAL SYMBOLS IMPORTANT SAFETY INSTRUCTIONS= ==CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPEN |
Related manuals for MAG Sub H12
manualsdatabase
Your AI-powered manual search engine