12USING THE GRATING/SLICING DISCSWe recommend that you use the discs in the Midi bowl.Slide the extension over the motor shaft.For non-reversible discs, make sure youplace the disc the right way up.Place the chosen disc with the relevantreference facing upwards.Slide the disc onto the extension. Turn it sothat it slots on properly. This is a two-stageprocess.• Always handle the discs with care, asthe blades are extremely sharp.• Never insert your fingers or a foreignobject into the feed tube. Always usethe pusher designed for that purpose.W A R N I N GSlicing/grating disc : each side is engravedwith a reference code, e.g. R/G4 = 4-mmgrater, E/S 2 = 2-mm slicer.For all XL Food Processors discs are non-reversible.R/ G 4E / S21 23 4R/G 4