6FITTING THE BOWL1. Place the bowl on the motor unit with thehandle to the left hand side.3. Place the chosen accessory in the bowl(see details on following page).5. Turn the lid in an anti-clockwisedirection until the locking device clicksinto position at the top of the handle.The safety rod is now in contact with themotor.4. Position the lid, completely flat, byplacing the feed tube to the left of thehandle.2. Turn the bowl anti-clockwise as far asit will go making sure it firmly locks intoposition. The handle will now be at thecentre of the motor unit.The Mini Plus is now ready to use.IMPORTANTIf the lid is not properly locked intoposition or if it is opened duringpreparation, the appliance willcease to function, even if the “ON”switch has been pressed.