MAIOR Levante Instruction Manual
                   | |
Contents | 
IT112. Assembly instructions2.1. General safety instructions- Wear an equipment suitable to the operations to be performed, avoiding garments and accessoriesthat hamper the various operations or is likely to become entangled in the machine.- Do not remove safety devices or protection.- Any technical changes that may affect the operation or safety of Maior Levante must be carried outonly by technical personnel of the manufacturer or formally authorized by the same technicians. Donot disassemble or special Maior Levante groups unless expressly authorized.- Make sure that the base to which will be attached to the machine is adequate to support the weightof the complete assembled machine Tv and any accessories, which at the limit of the data sheet canweigh 75Kg. Otherwise, the column could go into overload, up to deteriorateand break. This couldalso compromise the correct return of the cover panel in its seat, with its possible damage.2.2. InstallationThe installation of Maior Levante is closely linked to the work of the artisan who will carry out the cabinetthat contains the machine. The cabinet can be thought to be dedicated to only one slot of the TV as well asprovided with doors, drawers, shelves.2.2.1. Instructions and tips for creating mobileFor the furniture planning no special specifications. Follow these guidelines, however, will allow optimalperformance:- Define the final height of the cabinet according to the technical specifications of the machine.Consider that the machine has a minimum height of 842.5 mm, and that the column can developmaximum of 999 mm riser.- If the mobile provides drawers, doors, shelves, it is appropriate that the compartment in which themachine is physically isolated from the other sections of the cabinet is installed.In order to safeguard the integrity of the machine and the TV, make sure that the space dedicated tothe machine invades any object accidentally.- It is advisable to make provision for a removable backrest to ensure the space necessary for anoptimal installation.- In the embodiment of the seat of the cover panel to make sure that it is not weakened the structureof the cabinet and in particular its upper floor.In the case of a very close installation to one of the movable end, consider to reinforce theweakened portions of the floor taking care not to invade in any way the field of action of themachine and taking into consideration all dimensions (eg. Ornamental wings ⑦) |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine