11• USER INSTRUCTIONSMANIP toolshave been designedfor specific use,they have their ownresistance limits.Type of use suchas public works,land clearing,root cuttingis prohibited.8OBLIGATIONSRead the loader and sub frame’s user manual before using theloader.Control the loader exclusively from the driver’s seat; keepcontrol of the controls until movements are completed.Never leave the tractor with its loader in a raised position. Allvalves generate an internal oil leak necessary for operation,consequently the loader may drop.Only use implements suitable for the job to be done.WARNINGSUse a sufficient counter-weight to ensure the stability of thetractor,(See page 6 COUNTER LOAD).Adjust the maximum permissible tyre track of the tractor toincrease stability, refer to the manual of the tractor.Make sure that the machine is not damaged or that somecomponents are not missing and that the maintenance is followed.Periodically control that the nuts and bolts are tight especiallyaround the wheels and the sub-frame.Warning. If a tractor is not equipped with a protection againstfalling objects or a 4-pole structure against tipping over (tractorswith 2-pole arch), then the driver is exposed to a continuous riskwhen he manipulates a load.Always be aware of your surrounding and make sure thatnobody (especially children) is in your working area.Study your working area and what the ground looks like; mindthe holes and hidden obstacles.Verify and note the passage height compared to the height ofthe loader.Do not work near or on a slope.Make sure that the headlights are always visible and are nothidden by the tool.Always look at the tool, objects can sometimes fall and rolltowards the driver.Drive carefully always thinking of safety.Never drive faster than 10 km/h when the tool is loaded.Slow down when you are turning, lower the loader as much aspossible when in motion.