Mac Victor MVP-2KS Installation And Operating Manual
                       | |
Contents
| 
Mac Victor 2.0 Installation Operation Manual 042408.pdf - © 2008 Mac Victor Power, LLC. Page 9 of 234 – INSTALLATION4.1 Package ContentsThe packing box contains a Mac Victor 2.0, mounting hardware (wood stud mount only), a circuit polarity plugtester, safety outlet protector plugs (12), UPS strapping materials, and this Installation and Operating Manual.Carefully inspect all the contents. If any damage is visible immediately notify the carrier and the shipper.4.2 LocationPlease refer to Section 1.3 of the Important Safety Instructions regarding installation. Typical wall mountedlocations include the manager’s office, electrical room or closet, telecom equipment wall, datacom room, or othersecure locations that are not accessible to the public.To minimize the distance of branch circuit runs to the remote Isolated Ground receptacles, choose a relativelycentral location if possible to mount the Mac Victor 2.0.A location relatively close to a circuit breaker panel is also preferred since a single 120Vac, single phase circuit(Line, Neutral, and Ground) must be run to feed the input terminals of the Mac Victor 2.0.Allow for UPS mounting height on top of the Mac Victor 2.0 when locating the height of installation.4.3 Typical ElevationThe Mac Victor 2.0 Typical Elevation below provides a conceptual diagram of a typical wall mounted elevation thatshows the overall enclosure dimensions and typical input and output power wiring.Figure 4.1 – Mac Victor 2.0 Elevation |
manualsdatabase
Your AI-powered manual search engine