Macnaught MAN1915-01 Manual

Macnaught MAN1915-01 Manual Manual pdf 1 page image

INST-MAN19 ISSUE 3 © 2017 1MAN Narrow Gauge SeriesHeavy Duty Hose ReelsIntroductionMAN1915-01 (3/4”)OIL/AIR/WATER REELThank you for purchasing a Macnaught NarrowGauge MAN1915 Oil/Air/Water Reel.DescriptionYour Macnaught Oil/Air/Water Reel has beenmanufactured and constructed using high qualitymaterialsImportantPLEASE READ THIS SAFETY INFORMATIONCAREFULLY BEFORE USE.Please read and retain this instruction manual toassist you in the operation and maintenance of thisproduct.‘CAUTIONS’ are listed throughout this manual toadvise of actions that may cause personal injury ordamage to your equipment.CAUTIONNever exceed the pressure rating of any componentin the system. Remember this is an oil/air/water reelwhich is capable of a working pressure of 1250psi.Check equipment daily for any leaks or damage.Repair or replace worn or damaged itemsimmediately with genuine replacement parts.Before operation check hoses for signs of wear,leaks or loose fittings. Tighten all fluid connectionsregularly and replace weak or damaged hose.If accidental injection or injury should occur,seek IMMEDIATE emergency medical attention.Before attempting any maintenance or repairs ofthis product, carefully release the fluid pressure,before disconnecting the reel, failure to do thismay cause injuryCAUTIONTo prevent injury or damage occurring, do not letgo of the hose during rewinding.DO NOT attempt to stop leaks with your hand, bodyglove or rag.Installation1) Using the appropriate hardware, bolt the framebase of the reel to the desired location (SeeDrilling Template). Ensure the mounting is strongenough to support the weight of the reel.2) Pull out hose to check spring tension and adjust ifrequired (See Adjusting Spring Tension)3) Securely connect the fluid supply line to the reelinlet on the side of the reel.4) Turn on system and check for any leaks ordamage before use. Repair or reseal if required4) Securely connect the desired hose-endattachment to the hose outlet.Note: Thread sealant may be required