MadgeTech RFC1000 Product Information Card
Also see for RFC1000: Product user guideProduct user guideProduct user guideProduct user guideUser guide
    | |
RFC1000 Product Quick Reference CardRFOT: To program the channel on an RFOT data logger, unscrew the body ofthe RFOT and remove the enclosure. Switch the wireless ON / OFF switch (redswitch, next to the probe cable connector) to ‘0’. The dip switches are locatedon the back of the PCB (opposite side of the battery). Change the dip switches tomatch the photo. Return the wireless ON / OFF switch to ‘1’.Therm-A-Lert-Series: Switch the wireless ON / OFF switch to ‘0’. The dipswitches are located on the back of the device. Change the dip switches tomatch the photo. Switch the wireless ON / OFF switch back to ‘1’.Deploying and Activating DevicesStep 1: Plug the RFC1000 into the USB port on the base station computer.(Additional RFC1000s can be used as repeaters to transmit over greater distances)Step 2: If using multiple RFC1000s plug each one into a wall outlet in thedesired locations. (If transmitting over a distance greater than 1000 feet indoorsor 4000 feet outdoors or there are walls/obstacles/corners that need to bemaneuvered around, set up additional RFC1000s as needed.)Step 3: Verify that the data loggers are in wireless transmission mode byconfirming the wireless ON / OFF switch is in the ‘1’ position on each datalogger. (See Channel Programming steps above)Step 4: On your PC, launch the MadgeNet software program. All active dataloggers will be listed in the software showing that the device(s) are recognized.Step 5: To activate your data loggers, click on one to highlight, then click theClaim icon, and then click the Start button. Do this for each logger in your listthat you wish to activate.Step 6: To view data on the screen in real-time, click the Stream button.Mounting InstructionsFor best wireless performance, both the RFC1000 and the MadgeTech dataloggers should be mounted in the same orientation. This usually means thatthe external antenna should be pointing straight up. The antenna can pivot toaccommodate either a wall mount or a desk mount. |
Related manuals for MadgeTech RFC1000
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine