-22-2 carbide-tipped dowel drill bits ø 6 mm (0.24 in.)2 carbide-tipped dowel drill bits ø 8 mm (0.31 in.)Further scope of delivery DDF 40 MaxiMAX:1 package wooden dowels ø 6x30 mm (approx. 350pcs.)1 package wooden dowels ø 8x30 mm (approx. 200pcs.)1 additional support plate ZA1 additional stop set ZAG1 hose connector1 lateral stop set SA 3201 trim stop LA1 position indicator PAZ1 Allen key with handle1 bottle of glue1 dowel nozzle ø 8 mm (0.31 in.)2 anti-slip mats1 carrying case1 operating manual1 folder "Safety instructions"2.6 Safety devicesDangerThese devices are required for themachine's safe operation and maynot be removed or renderedinoperative.The machine is equipped with the following safetydevices:- Switch interlock during tool change- Protection against contact with the drill bits- Large bearing surfaces of the base plate and tiltingstop- Handles and handle recesses2.7 Use according to intended purposeThe duo-dowel system is exclusively designed fordrilling wooden materials using the drill bits approvedby us with a diameter between 3 mm and 12.2 mm(0.13 and 4.80 in.).Any other use than described above is notpermissible. The manufacturer cannot be held liablefor any damage arising from such other use.In order to use the machine as intended, comply withthe operating, maintenance, and repair instructionsspecified by Mafell.2.8 Residual risksDangerEven if used in accordance with itsintended purpose and despiteconforming with the safetyinstructions, residual risks causedby the intended use will alwaysremain.- Touching the drill bits inside and outside the baseplate.- Touching the drill bits on the workpiece rear whendrilling.- Breakage of the drill bits and risk of the drill bits orparts of them being hurled away.- Ejection of chips.- Touching live parts with the housing open and themains plug not removed.- Hearing can be impaired when working for longperiods without ear protectors.- Emission of harmful wood dusts during longeroperation without extraction.3 Safety instructionsDangerAlways observe the following safetyinstructions and the safetyregulations applicable in therespective country of use!General instructions:- Children and adolescents must not operate thismachine. This rule does not apply to youngpersons receiving training and being supervised byan expert.- Never work without the protection devicesprescribed for the respective operating sequenceand do not make any changes to the machine thatcould impair safety.