Points of Interest 41Copying a Preloaded POIPOIs that have been preloaded as part of the background map can be saved as a user-enteredPOIs. Preloaded POIs cannot be deleted; it just copies it to the My Points of Interestportion of the database.1. Press MENU.2. Use the Arrow joystick to highlight Pts of Interest.3. Press ENTER.4. Use the Arrow joystick up/down to highlight Background Map.5. Use the Arrow joystick left/right to select Nearest or Alphabetical.6. Press ENTER.7. [Only if Alphabetical selected] Use the Arrow joystick and the ENTER button toenter the first few characters of the POI you are searching for. Highlight OK andpress ENTER to continue.8. Use the Arrow joystick to highlight the POI to be copied.9. Press ENTER.10. Use the Arrow joystick to highlight Save.11. Press ENTER.Steps 12 through 14 are optional.12. Use the Arrow joystick to highlight the field you want to change.13. Press ENTER.14a. If the Icon field is selected: Use the Arrow joystick to select the icon desired andpress ENTER. To aid in your selection, the type of icon selected is displayed in theinformation block at the top of the keypad.14b. If the Name field is selected: Use the Arrow joystick to select the character desiredand press ENTER. If you make a mistake, highlight Back and press ENTER. Toaccess the lower-case characters, highlight Shift and press ENTER. To cleareverything and start over, highlight CLEAR and press ENTER. When you aresatisfied with the name, highlight OK and press ENTER.Note: User-entered POI names can be up to 20 characters long (including spaces).14c. If the Message field is selected: Use the keypad displayed, just as was describedin 14b, to enter a message for this POI.15. When the Icon, Name and Message fields are ready, use the Arrow joystick tohighlight Save.16. Press ENTER.17. Locate the file where the POI is to be saved and press ENTER.