9CONTROLSSETTING THE CLOCKWhen the oven is first plugged in, the display will flash ":0" and a tone will sound. If the AC powerever goes off, the display shows ":0" when the power comes back on.1. Touch CLOCK pad.This is a 12 hour clock system.2. Touch CLOCK pad once more.This is a 24 hour clock system.3. Enter the correct time of day by touching the numbersin sequence.4. Touch CLOCK pad.5. Touch STOP/CLEAR pad.NOTE: If you attempt to enter an incorrect time, the time will not be set and a error signal tone willsound. Touch the CLOCK pad and re-enter the time.The display stops blinking, and the colonstart blinking. If you selected 12 hour clocksystem, this digital clock allows you to setfrom 1:00 to 12:59. If you selected 24 hourclock system, this digital clock allows you toset from 0:00 to 23:59.TIME DEFROSTINGWhen TIME DEFROST is selected, the automatic cycle divides the defrosting time into periods ofalternating defrost and stand times by cycling on and off.When you touch START pad, the DEFROST indicator starts blinking to show the oven is in theDEFROST mode. The display counts down the time to show you how much defrosting time is left in theDEFROST mode. The oven beeps during the defrosting cycle to signal that the food needs to be turnedor rearranged. When the defrosting time ends, you will hear 3 beeps.NOTE: This oven has multiple clocksystem. If you want 12 hourclock system, omit this step.1. Touch DEFROST pad.2. Touch number pads for the desired defrosting time.3. Touch START pad.The DEFROST indicator lights and " : 0" isdisplayed.The display will show the numbers youpressed in the order you touched.CLOCKCLOCKDEFROSTNOTE: Your oven can be programmed for99 minutes 99 seconds.(99:99)MCD1311W(¿ )-131G2A-… `⁄ 01.9.11 7:5 PM ˘ ` 9