10The oven light is on only when the microwaveoven is operating.The oven door can be opened at any time duringoperation by pushing the door release button onthe control panel. The oven will automaticallyshut off.Each time a pad is touched, a BEEP will soundto acknowledge the touch.The oven automatically cooks on full powerunless set to a lower power level.The display will show “ : 0” when the oven isplugged in.Time clock returns to the present time when thecooking time ends.When the STOP/CLEAR pad is touched during theoven operation, the oven stops cooking and allinformation retained. To erase allinformation(except the present time), touch theSTOP/CLEAR pad once more. If the oven door isopened during the oven operation, all informationis retained.If the START pad is touched and the oven doesnot operate, check the area between the door anddoor seal for obstructions and make sure the dooris closed securely. The oven will not start cookinguntil the door is completely closed or the programhas been reset.OPERATION PROCEDUREThis section includes useful information about oven operation.1. Plug power supply cord into a standard 3-pronged 15 Amp, 120V AC 60Hz power outlet.2. After placing the food in a suitable container, open the oven door and put it on the glass tray.The glass tray and roller guide must always be in place during cooking.3. Shut the door. Make sure that it is firmly closed.12345678Make sure the oven is properly installed andplugged into the electrical outlet.WATTAGE OUTPUT CHART• The power-level is set by touching the POWER pad. The chart shows the display, the power level and thepercentage of power.Touch POWER pad Power level (Display) Approximate Percentage of Poweronce P-HI 100%twice P-90 90%3 times P-80 80%4 times P-70 70%5 times P-60 60%6 times P-50 50%7 times P-40 40%8 times P-30 30%9 times P-20 20%10 times P-10 10%11 times P-00 0%