12Basic Instructions1. Touch the COOK TIME Pad. “ENTERCOOKING TIME” will be displayed.2. Touch the appropriate number pads to enterthe cooking time. The selected time and“PRESS START” will be displayed.3. Touch the POWER Pad. *“POWERLEVEL IS HI [10]. TOUCH 1-9 FORNEW POWER LEVEL---PRESS START4. Touch the number pad for the power levelyou desire. *The selected power level and“PRESS START” will be displayed.5. Touch the COOK TIME Pad again.“ENTER SECOND COOKING TIME”will be displayed.6. Touch the appropriate number pads to enterthe cooking time for the second stage ofcooking. The selected time and “PRESSSTART” will be displayed.7. Touch the POWER Pad. *“POWERLEVEL IS HI [10]. TOUCH 1-9 FORNEW POWER LEVEL---PRESS START”will be displayed.8. Touch the number pad for the power levelyou desire. * The selected power level and“PRESS START” will be displayed.9. Touch the START Pad.Two Stage Cooking Three beeps signal the end of cooking. “ENDCOOK” appears in the Display. The audible beep between stages can serve asa reminder to add foods or ingredients.* Skip steps 3 and 4 or 7 and 8 if full power isdesired.This feature lets you program two sequentialoperations such as defrosting and cooking or cookingusing two different power levels. It automaticallychanges power settings and cooking time.Basic Instructions1. Touch the POPCORN Pad once for 3.5oz. package. The Display will show “3.50OZ BAG OF POPCORN” or2. Touch the POPCORN Pad twice for 1.75oz. package. The Display will show “1.75OZ BAG OF POPCORN”.Popcorn The POPCORN Pad has been automaticallyset for the correct cook time for a 3.5 oz. or1.75 oz. bag of popcorn. Listen as the popcorn pops and stop themicrowave when the popping slows down to3 seconds apart. Do not try to repop unpopped kernels or reusea bag. Pop only one package at a time.CAUTION: If prepackaged popcorn is adifferent weight than the recommendedweight, do not use the POPCORN Pad.Inadequate popping or a fire may occur.Follow manufacturer’s instructions.S p e c i a l F e a t u r e s