EN-9ENGLISHFRANÇAISEESPAÑOLConnect to a cableWhen your TV is connected to the cable socket,you may receive free digital and high definitionprogramming (depending on your cable provider).Digital and high definition cable channels can berecognized by the format of the channel number. Thechannel number includes a dot “.” For example, 11.1,46.30, 108.201. Contact your cable provider for moreinformation.Connect to a Direct Broadcast Satellite (DBS)CABLESATELLITECable Receiver BoxOR ORANTENNA SATELLITE CABLEORCableReceiver BoxORCABLEThere are two main DBS systems: DirecTV andDishNetwork. These systems require a separate,proprietary set-top box to decode signals and sendthem to the TV. The set-top box contains a digital TVtuner for receiving off-air digital television broadcasts.Contact your local DBS provider for moreinformation about the connections and the TVchannels.Connect to a cable receiver box/satellite set-top boxCABLESATELLITECable Receiver BoxOR ORANTENNA SATELLITE CABLEOR ORCABLEA cable receiver box or satellite set-top box canbe connected to the TV through the followingconnections:ANTENNA (75ohm)•A/V (Composite Video and Audio)•S-Video and Audio•YPbPr (Component Video Input)•HDMI•Connect a cable receiver box/satellite set-topbox through RF IN/OUTIf the TV is connected to a cable box or satelliteset-top box via a coaxial connection, set the TV tochannel 3 and 4, or the channel specified by theservice provider.Connect a cable receiver box/satellite set-topbox through component video input or HDMISATELLITECable Receiver BoxOR ORANTENNA SATELLITE CABLEORCableReceiver BoxORCABLE