Magnavox 20MS3442/17 Owner's Manual

Also see for 20MS3442 - 20" Real Flat Tv: Owner's manual Brochure

Magnavox 20MS3442/17 Owner's Manual Manual pdf 5 page image

DVD INPUTYCbCrIN2OUTVIDEOAUDIOR L- -75OHMANTENNAINPUTDVD INPUTYCbCrIN2OUTVIDEOAUDIOR L- -75OHMANTENNAINPUT5Basic Cable TV Connection75 OHMANTENNAINPUT75 OHMANTENNAINPUTCable TV companyCable TV companyCable BoxThe cable TV signal into your home maybe a single cable (75ohm) or may includea cable Box. In either case, the connectionto t he TV i s ea sy.If your Cable TV signal comes directlyvia a 75 ohm coaxial cable, use the foll-owing steps:Connect the Cable TV signal to the75 OHM ANTENNA INPUT jack onthe rear of the TV. Screw it downfinger tight.Plug the TV power cord into apower outlet and turn on the TV. SetTV/CATV to CATV as detailed in page11.Refer to AUTO SEARCH to set upyour available channels. Details areon page 12.If you have a Cable Box, use the follow-ing steps.Connect the Cable TV signal to theIN jack on the Cable Box.Connect the separate coaxial cableto the OUT jack on the Cable Boxand to the 75 OHM ANTENNA INPUTjack on the rear of the TV.Plug the TV s power cord into a poweroutlet and turn on the TV. Set TV/CATVto CATV as detailed in page 11.Set the TV to channel 3 or 4 (the sameas the Channel3/4 switch on your CableBox if applicable). Change channels atthe Cable Box.An RF coaxial cable (to con-nect the Cable Box to the TV)may be supplied by the CableTV company. It is not suppliedwith the TV but it is availablefrom Magnavox or electronicsretailers.You can connect a SatelliteReceiver the same way youwould connect a Cable Box.Helpful HintsYour Cable Box may have separate Audio and Video Out jacksinstead. If so, use audio and video cables to connect the AUDIO/VIDEO OUT jacks of the Cable Box to thePress the TV/AV on the remote control to set the TV to the AV2channel. Change channel at the Cable Box.AUDIO/VIDEO IN2jacks on the rear of the TV.s