Magnavox 22ME360B - Signature Series Owner's Manual

28ENC. Setting TV ratingsC. Setting TV ratings5 Use ɼ/ɾ to select [US TV Ratings Lock], then press OK.6 Use ɼ/ɾ / ɿ/ɽ to select the desired rating, then pressOK repeatedly to switch between [View] and [Block].PictureSoundSetupFeaturesLanguageFV V S L DTV-MATV-14TV-PGTV-GTV-Y7TV-YSelect OK View / Block BACKBackRating CategoryTV-MA Mature audience only higherTV-14 Unsuitable for children under 14TV-PG Parental guidance suggestedTV-G General audienceTV-Y7 Appropriate for all children 7 andolderTV-Y Appropriate for all children lower7 Press MENU to exit.To set the sub ratingsAs for TV-MA, TV-14, TV-PG, or TV-Y7, you can further setthe sub ratings to block speciÀc elements of programming.To set the sub ratings, follow the step below.Use ɼ/ɾ / ɿ/ɽ to select the desired rating, then pressOK repeatedly to switch between [View] and [Block].PictureSoundSetupFeaturesLanguageFV V S L DTV-MATV-14TV-PGTV-GTV-Y7TV-YSelect OK View / Block BACKBackSub Rating Category RatingFV Fantasy Violence TV-Y7V Violence TV-MATV-14TV-PGS Sexual SituationL Coarse LanguageD Suggestive Dialogue TV-14, TV-PGNote• Blocked sub rating will appear beside the main rating category in[US TV Ratings Lock] menu.• You cannot block a sub rating (D, L, S or V) if the main rating is set to[View].• Changing the category to [Block] or [View] automatically changes all its subratings to the same ([Block] or [View]).D. Change PIND. Change PINAlthough the default PIN code (0000) is supplied with the unit,you can set your own PIN code.5 Use ɼ/ɾ to select [Change PIN], then press OK.6 Press the Number buttons to enter the new 4-digit PINcode.• Enter PIN code again in [Confirm PIN.] entry field.PictureSoundSetupFeaturesLanguage_Enter PIN.Confirm PIN.PIN Code BACKBack7 Press MENU to exit.Note• Make sure new PIN code and conÀrm PIN code must be exactly the same.If they are different, the space is cleared for reentering.• Your PIN code will be erased and return to the default (0000) when apower failure occurs.If you forget the PIN code, unplug the AC power cord while turning the uniton, wait for 10 seconds to plug the AC power cord again.The unit will restore the PIN code to 0000 as the factory default.