13 INTRODUCTION PREPARATION WATCHING TV USING FUNCTIONS USEFUL TIPSCONNECTING DEVICES INFORMATIONEnglishsalut!hola!hi!TV Screen Display Mode5 types of display modes can be selected when the broadcasting station is sending 16:9 or 4:3 video signal. And 3 types of displaymodes can be selected for PC input signal.Press FORMAT repeatedly to switch the TV aspect ratio.For 16:9 video signal Normal displays a 16:9 picture at its original size.4:3 displays a 16:9 picture at a 4:3 size; the picture isshortened horizontally. Sidebars appear on both edgesof the screen.Movie expand displays a 16:9 picture that isvertically stretched to fill the screen. This only cropsout the top of the picture.Zoom displays a 16:9 picture at its maximum sizewithout changing its horizontal and vertical ratio.Wide displays a horizontally stretched picture. Thiscrops out the left and right sides of the picture.NormalNormalWideWide4:34:3 Movie expandMovie expandZoomZoomFor 4:3 video signal Normal displays a 4:3 picture at its original size.Sidebars appear on both edges of the screen.16:9 displays a 4:3 picture at a 16:9 size; the picture isstretched horizontally to fill the screen.Movie expand displays a 4:3 picture at a 16:9 size;the picture is stretched more vertically at the top ofthe screen. This crops out the top of the picture.Zoom displays a 4:3 picture at a 16:9 size; at itsmaximum size that is more vertically stretched to fillthe screen. This crops out the top and bottom of thepicture.Wide displays the picture with its center at theoriginal size and the edges stretched horizontally to fillthe screen.NormalWide16:9 Movie expandZoomFor PC input signal Normal displays a proportionately stretched picture.Sidebars appear on both edges of the screen.Full displays a picture that is stretched out ofproportion horizontally to fill the screen.Unscaled displays a picture in its original size.Normal UnscaledFullSound Functionsdescribe how to change the audio or the audio language as well as the volume.Volume AdjustmentSilence ModePress MUTE to turn off the sound temporarily.Mutewill be displayed for a few seconds.• Press MUTE again or VOL +/− to recover the original volume.Use VOL +/− to adjust the volume.Volume 30will be displayed for a few seconds when adjusting the volume.Switching Audio ModeATSCPress SAP repeatedly to cycle through the available audiolanguages.• Available languages differ depending on the broadcast.• [Other] is displayed when the audio language cannot beacquired, or the acquired languages are other than English,Spanish or French.11.1English 1/3NTSCPress SAP to display the currently selected audio mode.While receiving an MTS broadcast, press repeatedly to cyclethrough the available audio channel.11SAP / STEREOe.g.) When all audio are availableSAP / STEREO SAP / MONO SAP / STEREOSTEREO : Outputs stereo-audioSAP : Outputs second audio programMONO : Outputs mono-audio