O PERATING DVD38EN PlaybackBefore you begin:Turn on the amplifier and any other equipment which is connected to this unit.Make sure the external audio receiver (not included) are set to the correct channel.1 Press [yy(power)] to turn on the unit.2 Insert a disc with label facing forward.# CAUTION• Do not put coins orforeign objects intothe disc loading slot.label• In case the DVD was recorded on both sides, makesure the label of the side you want to play back isfacing forward.3 The unit switches to the DVD mode when the unit wasin TV mode and detects the type of disc.e.g.) DVDDVD• Press [PLAY B] if the unit does not go to the DVD mode.4 The unit starts playback.• If playback does not start automatically, press [PLAY B]again.5 Press [STOP C] to stop playback temporarily.• If playback remains stopped for 20 minutes, the unit willturn itself off automatically when “AUTO POWER OFF“ isset to “ON“.6 Press [EJECT A] to eject the disc.Note:• “ ” may appear at the top-right on the TVscreen when the operation is prohibited by thedisc or this unit.• Some DVD may start playback from title 2 or 3 due tospecific programs.• During the playback of a 2-layered disc, pictures may stopfor a moment. This happens while the 1st layer is beingswitched to the 2nd layer. This is not a malfunction.• When you cannot remove the disc, you may try eitherfollowing operations.- Press and hold [EJECT A] on the unit for more than 5 seconds.- Unplug the AC power cord and plug it in again, then press[EJECT A].It will take about 10 seconds to eject the disc, while that theunit will not respond to any key commands. Disc MenuDVDSome discs contain disc menus which describe the contents of the disc orallow you to customize disc playback, or title menu which lists the titlesavailable on the DVD.To display the DVD menu, press [DISC MENU] and use[Cursor K / L / s / B] to select an item, then press [OK](or [PLAY B]).To display the top menu, press [TITLE] and use[Cursor K / L / s / B] to select an item, then press [OK](or [PLAY B]).Note:• Menu operations may vary depending on the disc.Refer to the manual accompanying the disc for more details. Resume PlaybackPress [STOP C] during playback.Resume message will appear onthe TV screen.Press [PLAY B]. Playback willresume from the point at whichplayback was stopped.Press 'PLAY' to play from here.To play the beginning,press 'STOP' first and then 'PLAY'.Resume ONNote:• To cancel resume, press [STOP C] one more time in thestop mode. On some discs, [STOP C] will not work whilethe resume message appears. Please wait until the messagedisappears.• The resume information will be kept even when the unit isturned off. However, ejecting the disc will cancel the resumefeature. Playback will start at the beginning the next timeyou insert the disc. Paused and Step-by-step PlaybackPress [PAUSE F] during playback.• Playback will be paused and sound will bemuted.To continue playback, press [PLAY B].DVDEach time you press [PAUSE F] in the pause mode, thedisc goes forward one frame at a time.To continue playback, press [PLAY B].Note:• Set “STILL MODE” to “FIELD” in the “OTHERS” menu ifpictures in the pause mode are blurred. Refer to page 49.These operations are accessible by remote control. Some may also be accessible by controls on the main unit.