Magnavox 26MF605W Series Owner's Manual

Also see for 32MF605W Series: Owner's manual Product specifications Brochure Owner's manual Owner's manual

Contents

Magnavox 26MF605W Series Owner's Manual Manual pdf 3 page image

IMPORTANT SAFETY INSTRUCTIONSREAD BEFORE OPERATING EQUIPMENTNote to the CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connectedto the grounding system of the building, as close to the point of cable entry as practical.Example of Antenna Grounding as per NEC - National Electric CodeANTENNA LEAD IN WIREANTENNA DISCHARGE UNIT (NEC SECTION 810-20)GROUNDING CONDUCTORS (NEC SECTION 810-21)GROUND CLAMPSPOWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)GROUND CLAMPELECTRIC SERVICE EQUIPMENT3Read these instructions.Keep these instructions.Heed all warnings.Follow all instructions.Do not use this apparatus near water.Clean only with a dry cloth.Do not block any of the ventilation openings.Install in accordance with the manufacturers instructions.Do not install near any heat sources such as radiators, heatregisters, stoves, or other apparatus (including amplifiers) thatproduce heat.Do not defeat the safety purpose of the polarized orgrounding-type plug. A polarized plug has two blades with onewider than the other. A grounding type plug has two bladesand third grounding prong. The wide blade or third prong areprovided for your safety. When the provided plug does not fitinto your outlet, consult an electrician for replacement of theobsolete outlet.Protect the power cord from being walked on or pinchedparticularly at plugs, convenience receptacles, and the pointwhere they exit from the apparatus.Only use attachments/accessories specified by themanufacturer.Use only with a cart, stand, tripod, bracket, or tablespecified by the manufacturer, or sold with theapparatus. When a cart is used, use caution whenmoving the cart/apparatus combination to avoid injury fromtip-over.Unplug this apparatus during lightning storms or when unusedfor long periods of time.Refer all servicing to qualified service personnel. Servicing isrequired when the apparatus has been damaged in any way,such as power-supply cord or plug is damaged, liquid has beenspilled or objects have fallen into apparatus, the apparatus hasbeen exposed to rain or moisture, does not operate normally,or has been dropped.This product may contain lead and mercury. Disposal of thesematerials may be regulated due to environmentalconsiderations. For disposal or recycling information, pleasecontact your local authorities or the Electronic IndustriesAlliance: www.eiae.orgDamage Requiring Service - The appliance should beserviced by qualified service personnel when:A. The power supply cord or the plug has been damaged;B. Objects have fallen, or liquid has been spilled into theappliance;C. The appliance has been exposed to rainD. The appliance does not appear to operate normally orexhibits a marked change in performance;E. The appliance has been dropped, or the enclosure damaged.Tilt/Stability - All televisions must comply with recommendedinternational global safety standards for tilt and stabilityproperties of its cabinet design.• Do not compromise these design standards by applyingexcessive pull force to the front, or top, of the cabinet whichcould ultimately overturn the product.• Also, do not endanger yourself, or children, by placingelectronic equipment/toys on the top of the cabinet. Such itemscould unsuspectingly fall from the top of the set and causeproduct damage and/or personal injury.Wall or Ceiling Mounting - The appliance should be mountedto a wall or ceiling only as recommended by the manufacturer.Power Lines - An outdoor antenna should be located awayfrom power lines.Outdoor Antenna Grounding - If an outside antenna isconnected to the receiver, be sure the antenna system isgrounded so as to provide some protection against voltagesurges and built up static charges.Section 810 of the National Electric Code, ANSI/NFPA No.70-1984, provides information with respect to proper groundingof the mast and supporting structure, grounding of the lead-inwire to an antenna discharge unit, size of grounding connectors,location of antenna-discharge unit, connection to groundingelectrodes, and requirements for the grounding electrode. SeeFigure below.Object and Liquid Entry - Care should be taken so thatobjects do not fall and liquids are not spilled into the enclosurethrough openings.Battery Usage CAUTION - To prevent battery leakage thatmay result in bodily injury, property damage, or damage to theunit:• Install all batteries correctly, with + and - aligned as marked onthe unit.• Do not mix batteries (old and new or carbon and alkaline,etc.).• Remove batteries when the unit is not used for a long time.1.2.3.4.5.6.7.8.9.10.11.12.13.14.15.16.17.18.19.20.21.22.MAG-26_eng 0104.indd 3 1/6/2005 10:30:33