Jack Panel ofAccessoryDeviceUSING THE SIDE AUDIO / VIDEO INPUTSAudio and Video Side Inputs are avail-able for a quick connection of a VCR, toplayback video from a camera or attach agaming device. Use the AV button on theremote control to tune these inputs.1Connect the video (yellow)cable from the Video output onthe Camera (or accessory device)to the Video (yellow) Input locat-ed on the SIDE of the TV.For S-Video Devices: Connectone end of the S-VIDEO CABLEto the S-VIDEO jack on the SIDEof the TV and the other end tothe S-VIDEO out jack on theCamera.2For Stereo Devices: Connectthe audio cable (red and white)from the Audio Left and RightOutputs on the Camera to theAudio L and R (white and red)jack on the SIDE of the television.For Mono Devices: Connectone end of the audio cable fromthe Audio Out jack on the deviceto the Audio L (white) jack on theSIDE of the television.3Turn the TV and the accessorydevice ON.4Press the CH + or CH- buttonsto set the TV to its SIDE chan-nel. (Go to your lowest channel,for example channel 1, then changechannels down to find the correctsource channel.)5Press the PLAY 3 button onthe accessory device to view play-back, or to access the accessorydevice (camera, gaming unit, etc.).VIDEOAUDIOLRS-VIDEOVIDEOAUDIORIGHT LEFT121 2 3 POWERCHCHVOLVOLSTATUSEXITSLEEP MUTESMARTPICTURE SOUNDSURFA/CH4 5 67 8 90 CCMENUMAGNAVOX435Jack Panellocated onthe Sideof TVSide A/V Input Connection:Video Cable(yellow)Audio Cables(red & white)OptionalHeadphonesWhen head-phones areused thesound comingfrom the TVspeakers willbe muted.83