Magnavox 32MD304V Owner's Manual

Also see for Magnavox 32MD304V: Owner's manual

Contents

4 Use your TVWatching Channels from an ExternalDevice1 Turn On the Set-top Box or the Connected Device.● The picture from the Set-top Box or the Connected Devicemight appear Automatically on the TV screen.If the picture does not appearPress SOURCE Repeatedly to select the Set-top Box or theConnected Device and wait a few seconds between eachselection until the Picture appears.Use the Remote Control for the Set-top Box or the ConnectedDevice to select Channels to view.Switching Audio ModeDigital TV Operation1 Press SAP / AUDIO to display thecurrently selected Language and thenumber of available Languages.2 Press SAP / AUDIO Repeatedly tocycle through the available Audio Languages.11.11/3English Note(s)● Available Languages differ depending on the Broadcast.● Other is displayed when the Audio Language cannot be foundor available Languages are other than English, French or Spanish.Cable / NTSC (Analog) TV Operation1 Press SAP / AUDIO to display the currently selectedAudio mode.2 While receiving an MTS broadcast,press SAP Repeatedly to cyclethrough the available Audio Channels.11SAP / STEREOChanging Picture and Sound SettingsYou must set Home in Location. p. 10Otherwise, personalized Picture and Sound settings will notbe memorized after the Unit goes into Standby Mode.Changing Picture Settings1 Press TV MENU and use to select Picture, thenpress OK.1850303002USBLanguageFeaturesSetupSoundPicture PersonalAdvanced settingsSharpnessTintColorBrightnessContrastBacklightAuto picture2 Use to select the item you want to adjust,then press OK.Auto pictureto select the desired Setting, then press OK(Personal, Standard, Vivid, Sports, Movie, Gameand Eco)Cursor CursorBacklight to Reduce PowerConsumption andBrightnessto Increase PowerConsumption andBrightnessContrast to Decrease Contrast to Increase ContrastBrightness to DecreaseBrightness to Increase BrightnessColor to Decrease ColorIntensity to Increase ColorIntensityTint to Add Red to Add GreenSharpness to Soften to SharpenAdvanced settingsto Select the desired Setting, then press OK.(Color alignment, Noise reduction, Blackstretch, Dynamic contrast and Gamma)7 Continued on next page.English