Magnavox 32MD359B User Manual

Also see for 32MD359B - 32" LCD TV: Quick start guide Specification

Contents

Magnavox 32MD359B User Manual Manual pdf 18 page image

18ENWATCHING TVChannel SelectionSelect channels by using [CH + / -] or [the Number buttons].To select the memorized channels, use [CH + / -] or[the Number buttons].To select the non-memorized channels, use[the Number buttons].To Use [the Number buttons]TVWhen selecting analog channel 11DTVWhen selecting digital channel 11.1Be sure to press [•] beforeentering the subchannel number.Press [PREV CH] to return to the previously viewedchannel.About digital TV broadcasting:With its high definition broadcast, digital broadcastingfar surpasses analog broadcasting in both its pictureand sound quality. Not all digital TV broadcasts are highdefinition (HD). To confirm whether your watching TVprogram is in HD, refer to the program guide, contactyour cable/satellite provider or local TV stations.NTSC(analog mode) ATSC(digital mode)18:0018:3019:0019:3020:00CH4-1 (Soccer) CH4-2 (News) CH4-3 (Tennis)CH4-1 (Soccer)CH4 (Soccer)CH4 (Soccer) CH4-1 (Soccer) CH4-2 (News)CH4 (Soccer)CH4 (Soccer) CH4-1 (Soccer)Air timesubchannelsubchannelmain channelmain channelmain channelmain channelsubchannelWhat is the subchannel?By using high compression technology, digitalbroadcasting offers a service that enables multiplesignals to send simultaneously.Therefore, you can select more than one program permain channel since digital broadcasting technologydistinguishes between multiple channels broadcast bya single network.Note:• “No Signal” will appear on the TV screen after thesubchannel broadcast is over.• “Audio only program“ message will appear on the TVscreen, when you receive only sound signal.5••--•Volume AdjustmentThis section describes how to adjust the volume. The mute function, whichturns the sound off and on, is also described.Use [VOL + / -] to adjust the audio volume.Volume 30The volume bar will be displayed at the bottom of theTV screen when adjusting the volume.The volume bar will automatically disappear in a fewseconds.Press [MUTE] to turn off and on the sound.Mute“Mute” is displayed on the TV screen for a few seconds.Press [MUTE] again or [VOL + / -] to recover theoriginal volume.Sleep TimerThe sleep timer can be set to automatically turn off the unit after anincremental period of time.1 Press [SLEEP] to set the sleep timer.Sleep OffSleep timer display appears on the TV screen.2 Press [SLEEP] repeatedly to change the amount of timeuntil shut off.Sleep 120min.You can set your unit to turn off after a set period oftime (from 30 to 120 minutes).Each press of [SLEEP] will increase the time by 30minutes.After setup, the sleep timer display can be called upfor checking by pressing [SLEEP].To cancel the sleep timerPress [SLEEP] repeatedly until “Sleep Off” is displayedon the TV screen.Note:• The sleep timer display will automatically disappear in afew seconds.• When you disconnect the unit from the AC outlet or whena power failure occurs, the sleep timer setting will becanceled.5•5••can be changed by using [CH + / -].