Magnavox 32MV402X Owner's Manual

Also see for 22MV402X: Owner's manual Manual del propietario Manuel du propriétaire

Contents

Magnavox 32MV402X Owner's Manual Manual pdf 9 page image

9English English EnglishChanging picture formatDisplay modes can be selected when your TV receives a16:9 or 4:3 video signal. Three types of display modes canbe selected for a PC Input signal.Press FORMAT repeatedly to switch the TV aspect ratio.For 16:9 video signalAutomaticWide screen4:3Full(1080i/p only)AutomaticOther than DTV and HDMI connected devices,enlarges the picture to best fit the screen. DTV andHDMI connected devices display the picture at itsoriginal size. The subtitles may remain visible.4:3Displays a 16:9 picture at a 4:3 size; the picture isshortened horizontally. Sidebars appear on bothedges of the screen.Wide screen Displays a 16:9 picture that is stretched horizontallyand vertically.Full (1080i/p only) Displays a 16:9 picture at its original size.For 4:3 video signalAutomatic 4:3Super zoomMovie expand 16:9 Movie expand 14:9Wide screenAutomaticOther than DTV and HDMI connected devices,enlarges the picture to best fit the screen. DTVand HDMI connected devices display the picture atits original size. The subtitles may remain visible.Super zoomDisplays a 4:3 picture at a 16:9 size; the picture isstretched horizontally and vertically and its left andright edges are enlarged. This crops out the topand bottom of the picture.4:3 Displays a 4:3 picture at its original size. Sidebarsappear on both edges of the screen.Movie expand14:9Displays a 4:3 picture at a 14:9 size; the picture isstretched horizontally and vertically. This crops outthe top and bottom of the picture. Sidebars appearon both edges of the screen.Movie expand16:9Displays a 4:3 picture at a 16:9 size; the picture isstretched horizontally and vertically. This crops outthe top and bottom of the picture.Wide screen Displays a picture that is stretched out ofproportion to fill the screen.For PC Input signal4:3 UnscaledWide screen• This unit can also be connected to your PC that has a DVIterminal. Use an HDMI-DVI conversion cable for this Videoconnection and it requires stereo mini plug conversion cable forAnalog Audio signal as well.• Refer to 16:9 video signal on this page if PC has HDMI Output.4:3 Displays a proportionately stretched picture.Sidebars appear on both edges of the screen.Wide screen Displays a picture that is stretched out ofproportion to fill the screen.Unscaled Displays a picture in its original size.Caption settingsClosed captioning displays the audio portion ofprogramming as text superimposed over the video.1 Display Setup using Home Menu and use ▲▼ to selectFeatures, then press OK.2 Use ▲▼ to select Caption settings, then press OK.Closed captions3 Use ▲▼ to select Closed captions, then press OK.4 Use ▲▼ to select On, Off orf On during mute, then pressOK.Digital TV operationDigital caption service3 Use ▲▼ to select Digital caption service, then press OK.4 Use ▲▼ to select the desired digital caption service,then press OK.CS-1 to CS-6Select one of these before changing any other itemin Caption settings Menu. Choose CS-1 undernormal circumstances.Analog/Cable TV operationCaption service3 Use ▲▼ to select Caption service, then press OK.4 Use ▲▼ to select the desired closed caption, thenpress OK.CC-1andT-1The primary caption and text services. The captioning ortext is displayed in the same language as the program’sdialog (up to 4 lines of script on the TV screen).g ( pp p )CC-3andT-3Serve as the preferred data channels.The captioning or text is often a secondary language.CC-2,CC-4,T-2andT-4Rarely available and broadcasters use them only in specialconditions, such as when CC-1 and CC-3 or T-1 and T-3are not available.•There are 3 display modes according to programs:p y g p gPaint-on Displays input characters on the TV screenimmediately.yPop-on Once characters are stored in memory, theyare displayed all at once.p yRoll-up Displays the characters continuously by scrolling(max. 4 lines).( )Digital caption optionsYou can choose the size, font, color, background and othercharacteristics of the caption text.3 Use ▲▼ to select Digital caption options, then pressOK.4 Use ▲▼ to select an item and press OK, then use▲▼ to select the desired setting and press OK.