Magnavox 40MF430B - Owner's Manual

Also see for 40MF430B -: Specifications Manual del propietario

Magnavox 40MF430B - Owner's Manual Manual pdf 19 page image

English19ENINTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATIONOPTIONAL SETTINGMain MenuThis section describes the overview of the main menudisplayed when you press MENU. The main menu consists ofthe function setting items below.Press MENU.PictureSoundSetupFeaturesLanguagePicture [Picture Adjustment] ➠ p.22Sound [Sound Adjustment] ➠ p.22Setup [Autoprogram] ➠ p.19• You can automatically scan the viewable channels.[Channel List] ➠ p.20• The Channels that were autoprogrammed are inthis Channel list, use CH + / − to access them.[Add Channels] ➠ p.20• You can add TV channels that were not found bythe autoprogram scan.Features [Closed Caption] ➠ p.24• You can change the display closed caption formatwhich displays the dialogue of a TV program orother text information across the TV screen.[Child Lock] ➠ p.27• You can set viewing limitations.[Fun-Link] ➠ p.29• You can set Fun-Link options.[Energy Saving Mode] ➠ p.30[Location] ➠ p.30• Switch setting from [Retail] to [Home] to allow thedesired [Picture] and [Sound] mode to be kept inmemory.[Current Software Info] ➠ p.30Language [Language Selection] ➠ p.21• Change the Main Menu language.AutoprogramIf you switch wires (e.g. between antenna and CATV) or if youmove the unit to a different area after the initial setting, or ifyou restore the DTV channels you deleted, it is recommendedto use Autoprogram to perform a new channel search.Before you begin:Make sure the unit is connected to antenna or cable.1 Press MENU to display the main menu.2 Use ▲/▼ to select [Setup], then press OK.3 Use ▲/▼ to select [Autoprogram], then press OK.4 Use ▲/▼ to select an appropriate option, then press OK.PictureSoundSetupFeaturesLanguageAutoprogram will rescan all channels.Auto programming may take more than 20minutes to complete.Select your signal source.ANT.INAntennaCable OrBackAntennaCable• When connected to VHF / UHF antenna,select [Antenna].• When connected to CATV, select [Cable].• [Autoprogram] will begin.Please wait while the system is scanning for channels. Auto programmingmay take more than 20 minutes to complete.75%Digital channels 10 chAnalog channels 6 chMENUExit• When the scanning and memorizing are completed, thelowest memorized channel will be displayed.Note• After setting [Autoprogram], using CH + / − on the remote control skipsunavailable programs automatically.• If you are not receiving a signal from your cable service, contact the Cableprovider.• If you press or MENU during autoprogram, the setting will be canceled.• Even if [Autoprogram] is completed, the channel setting will be lost if theAC power cord is unplugged before turning off the unit by pressing .• The PIN code will be required once you set a PIN code in the [Child Lock].➠ p.27• If you want to change your PIN code, follow the instruction of[Change PIN]. ➠ p. 28