Magnavox 42MF231D/331D User Manual

Also see for 42MF231D - Hook Up Guide: Quick start guide Specification sheet Specifications Software update Mounting guide

Magnavox 42MF231D/331D User Manual Manual pdf 18 page image

18SettingsInfoStart nowPreferencesSound preferencesFeatures preferencesMenu preferencesReset AV settingsReset AV settingsSettingsSetupInfoSourceAV1AV2AV3HDMIPreferencesSourceClockSideAnalog Audio InReset AV settingsThis function allows you to reset most of the picture and soundsettings to their default factory levels.Select Reset AV settings with the cursor down key.Press the cursor right key.Press the OK button to erase settings and reset them to theirdefault values.Select Source in the Setup menu.Press the cursor right to enter the list of types of devicesconnected to the selected input.Select the accessory device with the cursor up/down.When you select AV1, AV2, AV3, HDMI1, Side or Analog AudioIn, a list appears allowing you to identify which type of accessorydevice is attached to this input. The TV detects the presence ofthe connected device and the signal is routed appropriately.Analog Audio InIf your accessory device has a DVI output connector, only thevideo signal is transmitted in digital format. To input an audiosignal, please connect the analog audio L and R outputs to the TV’sL and R AV1 audio input plugs. To activate the audio function,select HDMI from the Analog Audio In menu to activate.Digital Audio OutIn addition to accepting audio input through HDMI, the TV canoutput Digital audio through the DIGITAL AUDIO OUT(SPDIF OUT) connector to an external amplifier or receiver.If your amplifier or receiver has a matching connector for DigitalAudio In, you can connect it with a single cable to the TV’sDIGITAL AUDIO OUT (SPDIF OUT). See ConnectAccessory Devices, Digital Surround Receiver, p. 29.SourceThis menu allows you to identify the accessory devices you haveconnected to the external inputs/outputs.HDMIDVIYPbPrVIDEORL HDMIAV1:Audio L/R123123